Thermal Precision Industrial Water Cooling

Design Options To Meet Virtually Any Application

dry
Dry Fluid Cooler
Dry Bulb Systems

wet
Evaporative Fluid Cooler
Wet Bulb Systems

open
Open towers and
Custom Systems

pump
Pump Package
The Heart of the System

Wet Bulb Cooling Water Systems
Need Lower Fluid Temperatures?

wet

A Packaged Evaporative Cooler System is the answer to cooling needs in high ambient temperature locations using temperature sensitive equipment. Thermal Precision Evaporative Fluid Coolers consist of a tube bundle, spray pump and cooling fan. The tube bundle is sprayed with water while a water glycol solution circulates through the tube bundle. Heat exchange occurs from the tube bundle to the spray water and is dissipated with the evaporation of the water. The cooler is sized for area wet bulb (ASHRAE 1%) for heat sensitive loads.

The water/glycol mixture is circulated between heat load and evaporative cooler through a packaged pump/control module, factory pre-piped and pre-wired for easy installation. The sealed, pressurized recalculating system eliminates scale corrosion build-up in your piping and heat generating equipment by eliminating entrained oxygen in the system. Corrosion inhibitors contained in the glycol provide further protection.

Evaporative units are available with axial fans, centrifugal fans, fan cycling, dampers and pan heaters as options to fit your specific requirements.

Closed Industrial Fluid Cooling Systems
are the solution to reducing high water and sewage costs. Eliminating high cooling tower maintenance costs, stopping water cooled equipment from fouling and conserve water to help your company become more environmentally friendly.

For more information about our cooling systems please look at the Standard Equipment.

For more information about our ENERGY RECOVERY OIL FREE AIR COMPRESSOR
The recovery system reduces energy to compressed air by 90%

For more information about our heat to energy recovery COOLING WATER SYSTEMS

For more information about our FREE HOT WATER HOT WATER HEAT RECOVERY SYSTEM

For more information about cooling in general please look at the About Cooling Page. 


Thermal Precision is a division of THERMOTECH CORPORATION.
Please contact us at:

Phone: (716) 823-3311
Fax: (716) 827-1245

Email:
thermcorp@thermalprecision.com

All images, text and data are property of Thermal Precision and THERMOTECH CORPORATION. All rights reserved. Content is subject to change without notice.